الکتروموتور ها – شرکت توسعه صنعتی فراسیم آرین

Polyimid-Film insulated Winding Wires
Standard:	IEC 60317-43 for round wire IEC 60317-0-1 IEC 60317-44 for rectangular wire IEC 60317-0-2 IEC 60172 NF C 31 616 E IEC 60851 -1-6	Description
		Polyimid –film taped ,round or rectangular winding wirs , are copper conductors wich are wrapped tightly with a polyimid-tape, coated on one or both sides with a FEP (teflon )- adhesive e.g.kapton FN , FCR or FWR The Temperature Index of the insulation is 240 Electrical properties : 4-5 KV -1 film 8-10 KV -2 film Conductor material : Bare copper , soft . Enamelled copper Standard range of dimension : Thickness : 1-6 mm Width : 2-20 mm Dimeter (round) : up to 6 mm Cross section : up to 80 mm²
Advantages :	-Very good dielectric strength -Outstanding resistance to corona discharges
Application:	Rotor and stator windings : Railway traction motors , heavy-duty d.c. motors , mining machine motors underwater motors

Type	( Construction)	Increase insize insulation
FO 100	One side FEP –coated Polyimide-filmTthickness 0.04 mm 50% overlap	0.15 ± 0.02 mm
2FO 100	Tow one side FEP –coated Polyimide-film thickness 0.04 mm 50% overlap each	Width 0.31 ± 0.03 mm Thickness 0.30 ± 0.03 mm
C 2.5 FO 100	Grade 2 enamelled Thermex 200 one side FEP –coated Polyimide-film thickness 0.04 mm 50% overlap	Enamel acc . to IEC plus 0.15 ± 0.02 mm
FO 140	One side FEO –coated Polyimide-filmTthickness 0.06 mm 50% overlap	0.25 ± 0.03 mm
2FO 200	Tow FEP –coated Polyimide-film 1) Both sides coated 0.05 mm thick 2) One side coated 0.04 mm thick with 50% cverlap each	Width 0.39 ± 0.04 mm Thickness 0.39 ± 0.04 mm

Water –Resistant Types :

Type

Construction

Increase insize insulation

FO 150

FEP –coated on one side special polyimide

–film( kapton *FWR ) , thickness 0.04 mm, overlap 50 %

0.15 ±0.02 mm

2FO 306

Tow FEP –coated on one side special polyimide

–film( kapton *FWR ) , thickness 0.04 mm ,

overlap 66 % resp 50%

Width 0.38±0.04 mm

Thickness 0.36±0.04mm

Corona resistant Types :

Type

Construction

Increase insize insulation

FO 180

FEP –coated on one side special polyimide

–film( kapton *FCR ) , thickness 0.04 mm 50 % overlap

0.15 ±0.02 mm

FO 181

FEP –coated on one side special polyimide

–film( kapton *FCR ) , thickness 0.04 mm 51-53 % overlap

0.22 ±0.02 mm

FO 182

FEP –coated on one side special polyimide

–film( kapton *FCR ) , thickness 0.04 mm 53-55 % overlap

0.23 ±0.02 mm

FO 185

FEP –coated on one side special polyimide

–film( kapton *FCR ) , thickness 0.04 mm 75 % overlap

0.25 ±0.03 mm

2FO 180

Tow FEP –coated on one side special polyimide

–film( kapton *FCR ) , thickness 0.04 mm with 50 % overlap each

Width 0.32 ±0.03mm

Thickness 0.30 ±0.03mm